All Pluto 6 control systems, add-on modules / Expansion, technology, software & drivers
Hello, Below is a document to help explain how our Mpltiplex Expansion board works in it's various configurations - (01-17145-1 PLUTO 256 LAMP/LED...
The utility is in F:\support, and the command line is: sox <infilename> -e -u-law -r 32k <outfilename> i.e. sox ring.wav -e -ulaw -r 32k...
I was trying to maintain a large quantity of HIF files for a recent project, so I wrote a small utility that allowed me to display HIF files, ideal...
Hello Heber users - Does anyone have a SAS 6.02 implementation for Pluto 6 or 8 out there? We know of many customers that use SAS with our...
Just a quick bit on the Pluto Audio Amp as I was asked some questions about using it and connecting a Bass speaker - Just one other point - Thise...
Just been asked this - Here are the Debug (BDM) Connections for a Pluto 6 - I don't think it's listed anywhere in our documentation ? 88
Hello, I have a problem. I am placing fonts on the screen, like this: InitDrawframe(0, screen1, HSIZE); LoadFont( gfsh28 ); TextColour(RED,...
Can I also draw a rectangle or box, the documentation has points, circle and lines, they work well, but I need a load of boxes for my game reels. ...
Q - I have tried the Heber Image Format, and the output from bmp24tohif is very similar to the previous .bin format. The difference is there are 8...
Q - How can I trigger a hard reset on Pluto 6? A -A Hard Reset is done by asserting a variable (*Xcra = 0x01) =>it triggers the FPGA And a halt...
Q - When I output a HIF image there appears to be 8 pixels at the beginning of the image that are not correct and the image appears to be shifted,...
We have added new options for security and you therefore need to add the following lines to the following files. config.c const ULONG...
Q. I can’t use the makemap utility, because I haven’t go the file “strings” in my directory. Where do I get this file? When you try to make a map...
Q. I have set a transparent colour, however when using HIF this colour is not transparent. This previously worked with BMP files, why is this? ...
The PIC switch log is implemented as a 10 entry circular buffer with entries numbered 0-9, so when entry 9 has been filled the next entry will...
Yes. You need to use the latest version of the libraries, available on the website at http://www.heber.co.uk/swdownloads/81-16616-22.zip -...
If what you call the “state” is a variable.... then you can back up the current variable in idram or sysram. All variables declared in idram.c or...
Approximate power consumption figures as follows. Please bear in mind that these are obtained under test conditions, without external devices...
Q. I’m trying to use an interrupt to monitor an input. There appear to be 2 predefined interrupts: 10ms and 250ms. For my application, the 10ms...
As standard Pluto 5 and 6 can run 6 Mechanical reels, but if you do run more than 5 then take care as the motor current is spread over multiple...
Use this control to limit the display of threads to those newer than the specified time frame.
Allows you to choose the data by which the thread list will be sorted.
Order threads in...
Note: when sorting by date, 'descending order' will show the newest results first.
Forum Rules
